General Usage

Installation instructions

1. Affix the spout cover securely to bathtub spout using the hook and loop strap.

2. Turn on the water and make sure the running water is making contact with the Water Temperature Sensor.

3. On many bathtub spouts, the spout cover will cover the entire spout. On others it will not. Safe and proper use is still possible, as long as running water is making constant contact with the Water Temperature Sensor at the bottom of the spout cover.

To allow the spout cover to dry fully, please remove it from your faucet in between uses.

How to change display from Fahrenheit to Celsius

Make sure that the temperature screen is turned off. Press and hold the power button for approximately 15 seconds. The screen should flash and beep, and then reappear in the alternate temperature scale. To turn back, repeat this process.

Was the spout cover discontinued?

Yes. The product was discontinued in June of 2018. Please contact Customer Care for additional information and to proceed with any warranty claims.